Skip to content
Mon–Sat, 10:00 AM – 5:30 PM +91 93630 47778

Misting · Commercial

Indoor High-Pressure Misting & Humidification

Cool or humidify large indoor spaces with fog that evaporates in the air, controlled by sensors so the room never gets damp.

Indoor High-Pressure Misting & Humidification

How misting helps: indoor high pressure

Indoors, the aim is usually precise humidity or gentle cooling. Our indoor systems use the same 70-bar technology with careful nozzle placement and humidity control, so spaces like printing rooms, warehouses with sensitive stock and large halls stay in the right band.

  • Printing and paper stores
  • Wood and furniture workshops
  • Large atriums and halls

Precise RH

Humidistats switch zones in stages.

Dry fog

No condensation on surfaces when sized correctly.

What you get

Benefits

Precise RH

Humidistats switch zones in stages.

Dry fog

No condensation on surfaces when sized correctly.

Low energy

Far less power than steam humidifiers.

Quiet

Pump can be placed outside the room.

Technical details

Typical system specification

Every system is sized after a survey; these are typical values.

ParameterTypical value
Pump pressureAbout 70 bar (1,000 psi) high-pressure plunger pump
NozzlesBrass or stainless body, 0.15–0.30 mm stainless/ruby orifice, 10/24 UNC thread, anti-drip check valve
Mist lineHigh-pressure nylon or stainless steel tubing with brass push-fit or compression fittings
ControlHumidistat and timer per zone
Water treatment5-micron sediment filter as standard; softener for hard borewell water

Applications

Where it is used

  • Printing and paper stores
  • Wood and furniture workshops
  • Large atriums and halls
  • Fruit and produce rooms
  • Electronics assembly (static control)
  • Museums and archives

Process

How we deliver it

  1. Site survey

    We measure the area, check sun, wind, ventilation and water supply, and note where people sit or work.

  2. Design & quote

    You get a nozzle layout, pump size, water treatment and a clear, itemised quote.

  3. Installation

    Our team fixes lines, pump and controls, usually within one to three days.

  4. Handover & service

    We test, set timers, show your staff how to run it and schedule pre-summer servicing.

FAQs

Frequently asked questions

Will it raise humidity too much?

No — humidistats stop the system at your set point.

Is the mist hygienic?

Use treated water, keep tanks covered and follow the service schedule. We do not recommend stagnant reservoirs.

Can it run on a timer only?

For cooling, yes; for humidification, a sensor is always better.

Where does the pump go?

Usually in a plant room or outside, with tubing run to the space.

Related

More commercial applications

Planning indoor high pressure misting?

Share photos and rough dimensions on WhatsApp. We will reply with a layout idea and a ballpark cost, usually the same working day.